The SolarRide™ transportation solution is comprised of solar modules and a charge controller that ensures you receive the maximum benefit from your solar investment.
SolarRide auxiliary power allows you to:
– Reduce Fuel Consumption. Use solar energy instead of gas to power auxiliary systems
– Reduce Maintenance Costs. Running the truck engine less results in decreased intervals for scheduled maintenance.
– Reduce Emissions. Using clean solar power instead of fuel reduces emissions to help truckers comply with environmental regulations
– Provide Stand-by Power. Use solar energy for standby power without running the engine.
– Provide Power to Truck De-icing Systems. De-ice the truck with solar energy instead of fuel
– Lift-gate
– APU Charging
– Refrigeration
75W Trickle Charger / Lift Gate |
190W APU |
225W APU |
≥500W APU |
|
---|---|---|---|---|
Modules
|
1 FLEX-03NS 75W
|
1 FLEX-03WS 190W
|
3 FLEX-03NS 75W
|
1 FLEX-03W 500W
|
Charge Controller
|
240/480W, 20 Amp
|
240/480W, 20 Amp
|
240/480W, 20 Amp
|
240/480W, 20A 800/1600W, 60 Amp
|
Cables
|
As Required
|
As Required
|
As Required
|
As Required
|
The Lesoleil cell is produced by depositing the CIGS film on a thin stainless steel sheet. The sheet is then cut into cell form, covered with the Ultrawire interconnect, and tested. The result is the most unique cell architecture in the industry.
Not only is it the highest efficiency thin film cell, it is lightweight, flexible, low cost, and the shape can be modified to fit any form factor.
METRIC |
LESOLELI CIGS CELLS |
CRYSTALLINE SI CELLS |
---|---|---|
Efficiency
|
17%
|
17%
|
Cost
|
Low
|
Low
|
Size
|
Adjustable
|
156 mm x 156 mm
|
Flexible
|
Yes
|
No
|
These characteristics enable a number of product applications that standard silicon panels cannot offer.
The FLEX Series module is a CIGS based flexible thin-film PV module that provides high power density for many types of roof applications. The panels are the highest efficiency, flexible, thin-film product on the market today, with >17% cell efficiency.
FLEX-N modules are ideal for standing seam metal roofs, and they bond to the roof surface with a simple peel-and-stick adhesive. This adhesive approach eliminates the need for racking and reduces labor and logistics cost to provide a 20% lower BOS cost than traditional glass solar systems. The FLEX Series module is IEC 61646 & IEC 61730 and UL 1703 certified and is available in three lengths.
FLEX-N modules provide customers the following significant benefits:
– The low weight of the modules
– No roof penetrations, eliminating the worry of leakage and damage to valuable contents within the building
– An aesthetically pleasing solar solution, preserving the original look of the metal roof by blending into the space between the seams.
– Superior wind resistance and a seismic advantage over traditional rack-and-panel systems where their higher profile increases the likelihood of damage in a hurricane or earthquake
– Shipping rolled instead of flat to enable a more efficient container size, saving money on freight
FLEX-03 Length
|
From 1710 mm (67.3 in, 5ft 7.3in) to 5910 mm (232.7 in, 19ft 4.7in )
|
Width
|
348 mm (13.7 in, 1ft 1.7in)
|
FLEX-02 Length
|
From 1710 mm (67.3 in, 5ft 7.3in) to 5910 mm (232.7 in, 19ft 4.7in)
|
Width
|
0.37m (14.6 in, 1ft 2.6in)
|
Power class
|
70W-310W
|
Aperture Efficiency
|
16.5%
|
Certifications
|
IEC 61646, UL 1703, For Roofing Systems as the external fire exposure per UL file E483778 for Class A, B or C,IEC 61730, IEC 61701 (Salt Spray), Korea KS Test
|
Warranty
|
10/25 year power, 5 year workmanship
|
– Standing seam metal roof
– Modified Bitumen roof
The FLEX Series module is a CIGS based flexible thin-film PV module that provides high power density for many types of roof applications. The panels are the highest efficiency, flexible, thin-film product on the market today, with >17% cell efficiency.
The FLEX-M Series module bonds to the roof surface with a simple peel-and-stick adhesive. This adhesive approach eliminates the need for racking and reduces labor and logistics cost to provide a 20% lower BOS cost than traditional glass solar systems. The FLEX Series module is IEC 61646 & IEC 61730, UL 1703 and Class A over TPO: Slope 2.5:12 certified.
The FLEX-W series provides customers the following significant benefits:
– The low weight of the module
– No roof penetrations, eliminating the worry of leakage and damage to valuable contents within the building
– An aesthetically pleasing solar solution, blending into membrane roofs.
– Superior wind resistance and a seismic advantage over traditional rack-and-panel systems where their higher profile increases the likelihood of damage in a hurricane or earthquake
– Shipping rolled instead of flat to enable a more efficient container size, saving money on freight
FLEX -03 M Length / Width
|
2580 mm (101.6 in, 8ft 5.6in) x 973 mm (38.3 in, 3ft 2.3in)
|
Power class
|
350W-390W
|
Aperture Efficiency
|
17.5%
|
Certifications
|
UL 1703, For Roofing Systems as the external fire exposure per UL file E483778 for Class A, B or C, IEC 61730, IEC 61646, IEC 61701 (Salt Spray)
|
Warranty
|
10/25 year power, 5 year workmanship
|
– TPO
– EPDM membrane roofs
The FLEX Series module is a CIGS based flexible thin-film PV module that provides high power density for many types of roof applications. The panels are the highest efficiency, flexible, thin-film product on the market today, with >17% cell efficiency.
The FLEX-W Series module bonds to the roof surface with a simple peel-and-stick adhesive. This adhesive approach eliminates the need for racking and reduces labor and logistics cost to provide a 20% lower BOS cost than traditional glass solar systems. The FLEX Series module is IEC 61646 & IEC 61730, UL 1703 and Class A over TPO: Slope 2.5:12 certified.
The FLEX-W series provides customers the following significant benefits:
– The low weight of the modules
– No roof penetrations, eliminating the worry of leakage and damage to valuable contents within the building
– An aesthetically pleasing solar solution, preserving the original look of the metal roof by blending into the space between the seams.
– Superior wind resistance and a seismic advantage over traditional rack-and-panel systems where their higher profile increases the likelihood of damage in a hurricane or earthquake
– Shipping rolled instead of flat to enable a more efficient container size, saving money on freight
FLEX -03 W Length / Width
|
2585 mm (101.8 in, 8ft 5.8in) x 1293 mm (50.9 in, 4ft 2.9in)
|
FLEX -03 WS Length / Width
|
1010 mm (39.8 in, 3ft 3.8in) x 1293 mm (50.9 in, 4ft 2.9in)
|
FLEX -02 W Length / Width
|
2597±7 mm (102.2±.3 in) x 993±13 mm (39.1±.5 in)
|
FLEX -02 WS Length / Width
|
1722±7 mm (67.8±.3in) x 993±13 mm (39.1±.5 in)
|
Power class
|
210W-510W
|
Aperture Efficiency
|
17.5%
|
Certifications
|
UL 1703, For Roofing Systems as the external fire exposure per UL file E483778 for Class A, B or C, IEC 61730, IEC 61646, IEC 61701 (Salt Spray)
|
Warranty
|
10/25 year power, 5 year workmanship
|
– TPO
– EPDM membrane roofs
The FLEX Series module is a CIGS based flexible thin-film PV module that provides high power density for many types of applications. The panels are the highest efficiency, flexible, thin-film product on the market today, with >17% cell efficiency.
The FLEX Series module bonds to surfaces with a simple peel-and-stick adhesive. This adhesive approach provides significant benefits such as superior wind resistance, a seamless low-profile look and eliminating the need for racking or penetrations into the surface. The FLEX Series module is IEC 61646 & IEC 61730, UL 1703 and Class A over TPO: Slope 2.5:12 certified.
The modules also have an enhanced uniform dark color scheme throughout obtained through specially engineered material upgrades.
These modules provide customers the following significant benefits:
– Low weight
– Shatterproof
– No surface penetrations, eliminating the worry of leakage and damage
– An aesthetically pleasing solar solution, blending into the structure surfae
– Superior wind resistance and a seismic advantage over silicon where their higher profile and breakable nature increases the likelihood of damage in a hurricane or earthquake
– Customizable for all possibilities and the highest efficiency
Available Widths
|
363 mm, 677 mm, 993 mm, 1293 mm
|
Available Lengths
|
1525 mm, other custom lengths possible
|
Power class
|
72W-288W or higher
|
Vmpp ranges
|
16Vˆ19V, 32Vˆ38V, 48Vˆ 57V, 64Vˆ76V
|
Aperture Efficiency
|
17.5%
|
Certifications
|
IEC 61646, IEC 61730
|
Warranty
|
10 year power, 5 year workmanship
|
Charge Controller Compatibility
|
Compatible with most battery charge controllers for standard 12v, 24v, 36v and 48v battery charging applications.
|
– Transportation: truck, RV, van, car, boat, etc.
– Off-grid battery charging
– Specialty architecture
The Lesoleil consumer charger uses the powerful and lightweight Lesoleil solar cell to produce a charger that weighs less than silicon chargers, performs better in low light, and is shatterproof.
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|
Product Name
|
Aurora Charger 12
|
Aurora Charger 24
|
Aurora Charger 48
|
Aurora Charger 97
|
Part Number
|
M12
|
M24
|
M48
|
M97
|
Module Size (mm) Unfolded
|
680 x 230
|
832 x 315
|
855 x 612
|
1100 x 920
|
Module Size (mm) Folded
|
230 x 200 x 20
|
315 x 245 x 20
|
305 x 252 x 35
|
305 x 255 x 55
|
Product Size (mm) Unfolded
|
680 x 230 x 12.5
|
832 x 315 x 12.5
|
855 x 612 x 14
|
1100 x 920 x 13
|
Colors Available
|
Black
|
Desert Camouflage
|
Digital Camouflage
|
Forest Camouflage
|
Weight (g)
|
250
|
450
|
900
|
1700
|
Power (max) W
|
12
|
24
|
48
|
97
|
Open Circuit Voltage (VoC)
|
8.1V
|
11.8V
|
23.3V
|
23.3V
|
DC Vmpp (V)
|
6.6V
|
9.9V
|
19.2V
|
19.2V
|
Impp (A)
|
2A
|
2.5A
|
2.6A
|
5.2A
|
USB Output
|
5V 2A Max
|
5V 2A
|
2x 5V 2.4A
|
2x 5V 2.4A
|
Adjustable Power Output of Charge Controller
|
N / A
|
N / A
|
1.25 ~ 36V
|
1.25 ~ 36V
|